Program 22 : Incoming Call Setup
22-14 : VRS Delayed Message for IRG
Level:
IN
Description
Use Program 22-14 : VRS Delayed Message for IRG (Incoming Group Ring) to define for each
incoming ring group the timers, VRS message number and type of tone for VRS Waiting Message.
Input Data
Incoming Ring Group Number 1 ~ 25
Item
No.
Item Input Data Description Default
01
1
st
Delayed Message
Start Time
0 ~ 64800 seconds Time before the VRS Delay Message is
played for IRG.
0
02
1
st
Delayed Message
Number
0 ~ 101
0 = No Message
101 = Fixed Message
VRS message that is used for the 1st De-
layed Message.
0
03
1
st
Delayed Message
Sending Count
0 ~ 255 (time) This is the number of times the 1st Delay
Message is played. If set to 0, the 1st De-
lay Message is not played.
0
04
2
nd
Delayed Message
Number
0 ~ 101
0 = No Message
101 = Fixed Message
VRS message that is used for the 2nd De-
layed Message.
0
05
2
nd
Delayed Message
Sending Count
0 ~ 255 (time) This is the number of times the 2nd Delay
Message is played. If set to 0, the 2nd De-
lay Message is not played.
0
06 Tone Kind at Message
Interval
0 = Ring Back Tone
1 = MOH Tone
2 = BGM Source
What is heard between the Delay Mes-
sage.
0
07 Disconnect Time Af-
ter the End of VRS
Delayed Message
0 ~ 64800 seconds
0 = No Disconnect
Time, after all 2nd Delay Messages are
played, before the caller is disconnected.
60
Conditions
None
Feature Cross Reference
None
ISSUE 6.0
SL1100
Programming Manual 2-273
Program
22
To Next Page
Loading...
