Program 15 : Extension, Basic Setup
15-01 : Basic Extension Data Setup
Level:
SA
Description
Use Program 15-01 : Basic Extension Data Setup to define the basic settings for each extension.
Input Data
Extension Number Maximum eight digits
Item
No.
Item Input Data Description Default Related
Program
01 Extension Name Up to 12 Characters Define the extension/virtual exten-
sion name.
Ext. 101 ~ 212 =
No Setting (V3.5
Changed)
02 Outgoing Trunk
Line Preference
0 = Off
1 = On
Use this option to set the extension
outgoing Trunk Line Preference. If
enabled, the extension user re-
ceives trunk dial tone when they lift
the handset. The user hears trunk
dial tone only if allowed by Trunk
Access Map programming (Pro-
grams 14-07 and 15-06). Refer to
the Line Preference feature for more
details.
0 14-06
21-02
03 SMDR Printout 0 = None (Station will
not be reported in the
SMDR print out.)
1 = Yes (Station will be
reported in the SMDR
print out.)
Use this option to include or exclude
the extension in the SMDR report.
1
04 ISDN Caller ID 0 = Disabled (CPN is
NOT sent.)
1 = Enabled (CPN is
sent.)
If both Program 15-01-04 and
10-03-05 are enabled, the system
includes Caller ID in the Setup mes-
sage as Presentation Allowed. If
these options are disabled, it is Pre-
sentation Restricted.
1 10-03-05
20-08-13
05 Restriction for
Outgoing Disable
on Incoming Line
0 = Supervise dial de-
tection
1 = Not supervise dial
detection
Enable or disable supervised dial
detection for an extension.
0 21-01-15
21-01-16
21-01-17
80-03-01
07 Do-Not-Call 0 = Off
1 = On
0 21-01-19
08 Call Attendant
Busy Message
0 ~ 100
(0 = No Setting)
0 11-11-59
40-10-08
09 Call Attendant
Answer Message
0 ~ 100
(0 = No Setting)
0 11-11-60
40-10-09
SL1100 ISSUE 6.0
2-126 Program 15 : Extension, Basic Setup
Program
15
To Next Page
Loading...
Need help?
General
