NEC SL1100 - Page 147

Item
No.
Item Input Data Description Default Related
Program
10 Extension Num-
ber
0 = Off (when set to Off
the system will not
send any outbound
calling party informa-
tion.)
1 = On (when set to ON
the system will send
calling party informa-
tion.)
This program enables/disables the
ability to send calling party name in-
formation on a per station basis.
0
13 Special ringtone
choice (V2.0 Add-
ed)
0 = Incoming extension
ring tone
1 = Tone pattern 1
2 = Tone pattern 2
3 = Tone pattern 3
4 = Tone pattern 4
5 = Tone pattern 5
(V3.0 Added)
6 = Tone pattern 6
(V3.0 Added)
7 = Tone pattern 7
(V3.0 Added)
8 = Tone pattern 8
(V3.0 Added)
When an incoming call is received
from the extension defined in this
PRG this item defines the ringtone
presented.
0 15-02-03
14 SMDR output of
made intercom
calls (V2.0 Add-
ed)
0 = Disable
1 = Enable
When set 0 it will not record the in-
ternal calls that been made.
0 15-01-49
15 SMDR output of
answered inter-
com calls (V2.0
Added)
0 = Disable
1 = Enable
When set 0 it will not record the in-
ternal calls that been received.
0 15-01-49
Conditions
None
Feature Cross Reference
None
ISSUE 6.0 SL1100
Programming Manual 2-127
Program
15