Program 90 : Maintenance Program
90-03 : Save Data
Level:
SA
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 90-03 : Save Data to save the programmed data on the CF Card. This program should
be used after changing the programmed data.
Input Data
Item
No.
Item Input Data Default
01 Save Data Dial 1 + press Hold (Press Hold only to cancel.) -
Conditions
• Before Uploading Customer Database please make sure you reset the system either by using 90-08
or Power down/up the system.
• When installing a compact flash card onto the PZ-VM21 the system MUST be powered off. Never
install or uninstall the compact flash card while the system is under power.
Feature Cross Reference
None
ISSUE 6.0 SL1100
Programming Manual 2-535
Program
90
To Next Page
Loading...
