NEC SL1100 - SIP Server Information Setup

Program 10 : System Configuration Setup
10-29 : SIP Server Information Setup
Level:
SA
Description
Use Program 10-29 : SIP Server Information Setup to define the SIP Proxy setup for outbound/
inbound. The 10-29 commands are not used in non-registration mode.
If entries are made in Program 10-29-xx for a SIP Server and the SIP Server is then removed or not used,
the entries in Program 10-29-xx must be set back to their default settings. Even if 10-29-01 is set to 0 (off),
the system still checks the settings in the remaining 10-29 programs.
Input Data
Profile
(V5.0 Added)
1 ~ 2
Item
No.
Item Input Data Description Default
01 Default Proxy (Out-
bound)
0 = Off
1 = On
This sets whether the SIP message is al-
ways sent through the Default Proxy.
0
02 Default Proxy (In-
bound)
0 = Off
1 = On
Need to be registered in registration mode.
This sets whether the SIP message is al-
ways received through the Default Proxy.
0
03 Default Proxy IP Ad-
dress
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
This is optional and used if the provider
gives you a proxy address that is different
than the registration address. If the provid-
er is using domain names instead of IP ad-
dresses, leave this at default.
0.0.0.0
04 Default Proxy Port
Number
0 ~ 65535 The port number of the Default Proxy is
set.
5060
05 Registrar Mode 0 = None
1 = Manual
The mode registered in the registration
server is set.
0
06 Registrar IP Address 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
IP address of the SIP registration server is
set.
0.0.0.0
07 Registrar Port Num-
ber
0 ~ 65535 The port number of the SIP registration
server is set.
5060
08 DNS Server Mode 0 = Off
1 = On
(Use Profile 1 Only)
(V5.0 Added)
This setting determines if the DNS server
is used.
0
ISSUE 6.0 SL1100
Programming Manual 2-31
Program
10