Program 34 : Tie Line Setup
34-06 : Add/Delete Digit for E&M Tie Line
Level:
IN
Description
Use Program 34-06 : Add/Delete Digit for E&M Tie Line to set digits that the system should add or
delete for Tie Lines.
• Delete Digit
Some Tie Line networks pass the location number and extension number to the remote side. This
program allows the system to ignore such numbers for a call.
If individual extension users do not want to receive an incoming call, they could delete all digits
including the extension number.
• Add Digit
If a Tie Line network requires additional digits to reroute the call to a location, the digits for the
location can be added to the received digits.
Input Data
Incoming Trunk Group Number
01 ~ 25
Item
No.
Item Input Data Default
01 Delete Digit 0 ~ 255 (255 = delete all digits) 0
02 Additional Dial Digits Up to four digits (0 ~ 9,
To Next Page
Loading...
