NEC SL1100 - SIP Extension CODEC Information Basic Setup

Program 84 : Hardware Setup for VoIPDB
84-19 : SIP Extension CODEC Information Basic Setup
Level:
IN
Description
Use Program 84-19 : SIP Extension CODEC Information Basic Setup to define the CODEC
information for the SIP extensions.
Input Data
Item
No.
Item Input Data Description Default
01 Number of G.711 Au-
dio Frame
1 = 10 ms
2 = 20 ms
3 = 30 ms
4 = 40 ms
Maximum number of G711 Audio Frames.
When the voice is encoded using the PCM
(Pulse Code Modulation) method, a unit is
a frame of 10ms.
2
02 G.711 Silence Detec-
tion (VAD) Mode
0 = Disable
1 = Enable
Select whether to compress silence with
G.711. When there is silence, the RTP
packet is not sent.
0
03 G.711 Type 0 = A-law
1 = μ-law
Set the type of G.711. 1
04 G.711 Jitter Buffer -
Minimum
0 ~ 255 ms Set the minimum value of the G.711 Jitter
Buffer.
20
05 G.711 Jitter Buffer -
Standard
0 ~ 255 ms Set the average value of the G.711 Jitter
Buffer.
40
06 G.711 Jitter Buffer -
Maximum
0 ~ 255 ms Set the maximum value of the G.711 Jitter
Buffer.
80
07 G.729 Audio Frame 1 ~ 6
(1 = 10 ms, 2 = 20ms,
etc.)
Maximum number of G729 Audio Frames.
G.729 assumes the audio signal made by
a specimen by 8 kHz and the frame of 10
ms is assumed to be a unit to 8 kbps by
the encoding compressed method.
2
08 G.729 Silence Com-
pression (VAD) Mode
0 = Disable
1 = Enable
Select whether to compress silence with
G.729. When there is silence, the RTP
packet is not sent.
0
09 G.729 Jitter Buffer -
Minimum
0 ~ 300 ms Set the minimum value of the Jitter Buffer
of G.729 is set. Jitter is the variation in the
time between packets arriving and the buf-
fer allows this variation to be absorbed.
20
10 G.729 Jitter Buffer -
Standard
0 ~ 300 ms Set the average G.729 Jitter Buffer. 40
11 G.729 Jitter Buffer -
Maximum
0 ~ 300 ms Set the maximum G.729 Jitter Buffer. 80
12 Number of G.723 Au-
dio Frame
1 = 30 msec
2 = 60 msec
Maximum number of the G.723 Audio
Frame.
1
14 G.723 Jitter Buffer -
Minimum
0 ~ 300 ms Set the minimum value of the G.723 Jitter
Buffer.
30
15 G.723 Jitter Buffer -
Standard
0 ~ 300 ms Set the average value of the G.723 Jitter
Buffer.
60
ISSUE 6.0 SL1100
Programming Manual 2-509
Program
84