Item
No.
Item Input Data Description Default Related
Program
40 Calling name dis-
play info via
trunk for stand-
ard SIP
0 = Both name and
number
1 = Name only
2 = Number only
3 = None
0
41 Time Zone(hour) 0 ~ 24
(- 12 ~ + 12 hour)
12
43 Video Mode 0 = Disable
1 = Enable
0
44 Using STD-SIP
Display for CPN
0 = Disable
1 = Enable
0
45 NAT plug & play 0 = OFF
1 = ON
Effect this program only when PRG
10-46-14 (for DR700) or PRG
10-33-05 (for Standard SIP Termi-
nal) are set to NAT mode. (V4.0 or
higher)
If you are setting the SIP Terminal
using remote router by turning this
setting ON you don't need to set the
Port Forward on remote router side.
(V4.0 Added)
Select sending RTP port number to
remote Router, use from negotiation
result (0) or received RTP packet (1)
1 10-46-14
47 Registration Ex-
pire Timer for
NAT (V4.0
Changed)
0 = Disable
60 ~ 65535 (sec)
On a per station basis, this setting
defines the SIP registration expiry
timer. This setting applies to DR700
stations or Standard SIP Terminal
connected via NAPT. If this value is
set to 0, for a NAPT terminal, the
value in PRG 84-23-01 (for DR700)
or PRG 10-33-01 (for Standard SIP
Terminal) are applied.
180 84-23-01
48 Subscriber Ex-
pire Timer for
NAPT (V4.0
Changed)
0 = Disable
60 ~ 65535 (sec)
On a per station basis, this setting
defines the SIP subscribe expiry
timer. This setting only applies to
DR700 stations or Standard SIP
Terminal connected via NAPT. If this
value is set to 0, for a NAPT termi-
nal, the value in PRG 84-23-02 (for
DR700) or PRG 10-33-01 (for
Standard SIP Terminal) are applied.
180 84-23-02
49 Receiving SIP IN-
FO (V4.0 Added)
0 = Disable
1 = Allowed any time
2 = Allowed while RTP
is not available
Enables to receive a SIP INFO mes-
sage from a standard SIP phone as
a dial information.
2
Conditions
None
Feature Cross Reference
None
ISSUE 6.0
SL1100
Programming Manual 2-139
Program
15
To Next Page
Loading...
