NEC SL1100 - Page 164

Function
Number
Function Additional Data LED Indication Note
55 Extension Name
Change
None
56 General Purpose
LED Operation
001 ~ 100 :
(Red) On Off
001 ~ 100 : (Red) On Off
57 General Purpose
LED Indication
001 ~ 100 :
(Red) On Off
001 ~ 100 : (Red) On Off
58 Automatic Trans-
fer at Department
Group Call
Extension Group
Number
(01 ~ 32)
Slow Blink (Red) : Set
Off : Cancel
59 Delayed Transfer
at Department
Group Call
Extension Group
Number
(01 ~ 32)
Slow Blink (Red) : Set
Off : Cancel
60 DND at Depart-
ment Group Call
Extension Group
Number
(01 ~ 32)
Slow Blink (Red) : Set
Off : Cancel
62 Flash Key None
63 Outgoing Call
Without Caller ID
(ISDN)
On (Red) : Mode enabled
66 CTI (V3.0 De-
leted)
On (Red) : CTI active
72 Keypad Facility
Key
73 Keypad Hold Key
74 Keypad RE-
TRIEVE Key
75 Keypad Confer-
ence Key
76 Application Key Any dial data (8 dig-
it)
None
77 Voice Mail (In-
Skin)
Extension Number
or Pilot Number
<InMail>
Fast Blink (Green) : New Message (s) in own Mail-
box.
Slow Blink (Red) : New Message (s) in other Mail-
box.
<External VM>
On (Red) : Access to Voice Mail
Fast Blink (Green) : New Message (s) in own Mail-
box.
Slow Blink (Red) : New Message (s) in other Mail-
box.
78 Conversation Re-
cording - Voice
Mail
Fast Blink : Recording
79 Automated At-
tendant (In-Skin)
Extension Number
or Pilot Number
On (Red) : Setup - All calls
Fast Blink (Red) : Setup - No answer calls
(125msec on/125msec off/125msec on/625msec
off) (Red) : Setup - busy calls
Slow Blink (Red) : Setup – busy/noans calls
80 Tandem Ringing 1 = Set
0 = Cancel Exten-
sion Number to Tan-
dem Ring
On (Red) : Master Side
Slow Blink : Slave Side
81 Automatic Trans-
fer to Transfer
Key
Trunk Line No.
(001-084)
Off : Cancel
Slow Blink (Red) : Set
SL1100 ISSUE 6.0
2-144 Program 15 : Extension, Basic Setup
Program
15