NEC SL1100 - Page 206

Item
No.
Item Input Data Description Default
16 Call Redirect 0 = Off
1 = On
Turns off or on a multiline terminal user
ability to transfer a call to a predefined
destination (such as an operator, voice
mail, or another extension) without an-
swering the call.
COS 01 ~ 15 = 1
17 Department Group
Trunk-to-Trunk Trans-
fer (Each Telephone
Group Transfer)
0 = Off
1 = On
Turns off or on an extension user ability to
set Trunk-to-Trunk Forwarding for a De-
partment Group.
COS 01 ~ 15 = 1
18 No Recall 0 = Off
1 = On
No Recall set to "Allow" (1) will not stop
transferred calls from recalling from a virtu-
al extension.
COS 01 ~ 15 = 0
19 Hold/Extended Park 0 = Off
1 = On
Determine if an extension Class of Service
should allow either a normal or extended
Park.
COS 01 ~ 15 = 0
20 No Callback 0 = Off
1 = On
Turns off or on an extension to receive
callbacks.
COS 01 ~ 15 = 0
21 Restriction for Tan-
dem Trunking on
Hang Up
0 = Allow
1 = Deny
Allow (0) or Deny (1) an extension user
ability to set up a tandem/conference call
automatically when they hang up.
COS 01 ~ 15 = 0
22 Restricted Unsuper-
vised Conference
0 = Allow
1 = Deny
Allow (0) or Deny (1) an extension ability
to initiate an unsupervised conference.
COS 01 ~ 15 = 0
23 VE Call Forward Set/
Cancel
0 = Off
1 = On
Turn on or off an extension ability to set or
cancel call forwarding for a virtual exten-
sion.
COS 01 ~ 15 = 1
24 Trunk Park Hold
Mode
0 = Non Exclusive Hold
(Off)
1 = Exclusive Hold (On)
Set the hold type when a trunk call is put
on hold by an extension.
COS 01 ~ 15 = 1
25 Transfer Park Call 0 = Off
1 = On
Turn off or on an extension ability to trans-
fer a parked call.
COS 01 ~ 15 = 1
26 Station Park Hold
mode
0 = Off
1 = On
COS 01 ~ 15 = 0
27 Call Park Automati-
cally Search
0 = Off
1 = On
COS 01 ~ 15 = 1
28 Both Ring Enhance-
ment
0 = Normal
1 = Enhanced
COS 01 ~ 15 = 0
30 Disable Call FWD In-
dication on LCD (V3.0
Added)
0 = Off
1 = On
When set to 1, Call FWD setting is not
shown on the terminal LCD.
COS 01 ~ 15 = 1
31 Transfer to Remote
Conference (V6.0
Added)
0 = Off
1 = On
Use this option to enable or disable an ex-
tensions ability to transfer a call to a re-
mote conference.
COS 01 ~ 15 = 1
Conditions
None
Feature Cross Reference
• Class of Service
SL1100
ISSUE 6.0
2-186 Program 20 : System Option Setup
Program
20