NEC SL1100 - Page 225

Item
No.
Item Input Data Description Default
14 No Response Release
Send
0 = Off
1 = On
Operation mode setting for when second
T303 timer expires.
0
15 Call Reference selec-
tion for PRI 2B-Ch
Transfer
0 = Off
1 = On
0
18 Include CPN on Pre-
sentation Restriction
(V3.0 Added)
0 = Not include
1 = Include
When the presentation indicator bit is set
(by pressing key 63 in PRG 15-07) the
ISDN setup message is changed as fol-
lows:
When set to "Include" the CPN from the
station or trunk is sent in the setup mes-
sage.
When set to "Disable" the CPN from the
station or trunk is NOT sent in the setup
message.
0
19 Send Progress Mes-
sage on Forward
(V3.0 Added)
0 = Disable
1 = Enable
When enabled if an ISDN call forwards out
of the system a Progress Message will be
sent for the initial call.
0
Conditions
None
Feature Cross Reference
• ISDN Compatibility
ISSUE 6.0 SL1100
Programming Manual 2-205
Program
20