NEC SL1100 - Page 337

Function
Number
Function Additional Data LED Indication Note
80 Tandem Ringing Set Up
Key
0 = Cancel
1 = Set
Extension Number to
Tandem Ring (8 dig-
its)
On (Red) : Master Side
Slow Blink (Red) : Slave Side
81 Automatic Transfer to
Transfer Key
Trunk Line Number
001 ~ 084
Off : Cancel
Slow Blink (Red) : Set
83 Conversation Recording
Function
0 = Pause
1 = Re-record
2 = Address
3 = Erase
4 = Urgent Page
84 Line Drop (send long
flash)
86 Private Call Refuse None Off : Cancel
Slow Blink (Red) : Set
87 Caller ID Refuse None Off : Cancel
Slow Blink (Red) : Set
88 Dial-In Mode Switching Program 22-17, Table
No. 1 ~ 500
Off : pattern 1, pattern 5 ~ 8
On (Red) : pattern 2
Slow Blink (Red) : pattern 3
91 Live Monitoring Key Slow Blink (Red) : Set
92 Wake Up Call Indication None Set : On
No Set : Off
No answer : Blink(On (125ms)/Off
(125ms)
93 Room Status Indication None ON : Checked In and Clean
OFF : Checked Out (clean and available)
SLOW blink : Maid Required [On
(500ms)/Off (500ms)]
MEDIUM blink : Maid in Room [On
(250ms)/Off (250ms)]
FAST blink : Inspect Room [On
(125ms)/Off (125ms)]
94 Call Attendant Fast Blink (Red) : Setup - No answer
calls
(125msec:on
125msec:off
125msec:on
625msec:off) (Red) : Setup - Busy
calls
On (Red) : Setup - Busy/No answer calls
95 Page Switching None Red On : Page 1
Slow Blink (Red) Page 2
97 Door Box Access Key Doorphone No. (1 ~
6)
On (Red) : Door Box Busy
Off : Door Box Idle
Fast Blink (Red) : Door Box Incoming
98 Message Waiting Indi-
cation Key
None ON : New Message
OFF : No Message
99 Alternate Answer Key None
ISSUE 6.0 SL1100
Programming Manual 2-317
Program
30