NEC SL1100 - Page 34

Item
No.
Item Input Data Description Default
04 Time Zone 0~24 (0 = -12 Hours and
24 = +12 Hours)
Determine the offset from Greenwich
Mean Time (GMT) time.
Then enter its respective value.
For example,
Eastern Time (US and Canada) has a
GMT offset of -5.
The program data would then be 7
(0 = - 12,
1 = - 11,
2 = - 10,
3 = - 9,
4 = - 8,
5 = - 7,
6 = - 6,
7 = - 5,
:
24 = + 12)
07
05 NIC Interface 0 = Auto Detect
1 = 100Mbps, Full Du-
plex
2 = 100Mbps, Half Du-
plex
3 = 10Mbps, Full Duplex
4 = 10Mbps, Half Duplex
NIC Auto Negotiate
(CPU)
0
06 Network Address Port
Translation (NAPT)
Router Setup (V5.0
Deleted)
0 = No (Disable)
1 = Yes (Enable)
If using an external NAPT Router or not. 0
07 NAPT Router IP Ad-
dress(Default Gate-
way [WAN])
0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
Set the IP address on the WAN side of
router.
0.0.0.0
08 ICMP Redirect 0= NO, Signaling pack-
ets will follow the ICMP
redirect message.
1= YES, Signaling pack-
ets will NOT follow the
ICMP redirect message.
When receiving ICMP redirect message,
this determines if the IP Routing Table up-
dates automatically or not.
0
09 IP Address 0.0.0.0 ~
126.255.255.254
128.0.0.1 ~
191.255.255.254
192.0.0.1 ~
223.255.255.254
Assign the IP Address for the VoIPDB.
If a VoIPDB is installed in the system it is
recommended to set PRG 10-12-01 to
0.0.0.0 and all connections to the system
will be made through the VoIPDB.
172.16.0.10
SL1100 ISSUE 6.0
2-14 Program 10 : System Configuration Setup
Program
10