NEC SL1100 - Page 372

Item
No.
Item Input Data Description Default
13 CLI Output When DID
to Trunk
0 = Not Displayed
1 = Displayed
Determine if the CLI output should be dis-
played for DID.
0
14 Date 0 = Not Displayed
1 = Displayed
Determine whether or not the date should
be displayed on SMDR reports.
This option must be set to 0 if the trunk
name is set to be displayed in Program
35-02-03.
0
15 CLI/DID Number
Switching
0 = CLI (CLIP)
1 = DID Calling Number
2 = Calling Party Name
Determine whether or not the CLI/DID
Number Switching should be displayed.
0
16 Trunk Name or Re-
ceived Dialed Number
0 = Trunk Port Name
1 = Received Dialed
Number
2 = Both
Determine how the SMDR should print in-
coming calls on ANI/DNIS or DID trunks. If
set to (1), ANI/DNIS trunks can print DNIS
digits. If set to (0) trunk names are printed
instead.
0
17 Print Account Code
or Caller Name of In-
coming Call
0 = ACC
1 = CNAME
Determine if SMDR should print Account
Code or Caller Name of Incoming Call.
0
18 Print Mode for Caller
Name of Incoming
Call
0 = Normal
1 = Line Feed
Determine how SMDR should print Caller
Name of Incoming Call.
0
19 Dialed Number Out-
put Format
0 = Display from the first
digit
1 = Display from the last
digit
Determine if the dialed number should dis-
play from the first digits or from the last
digits. This option is only available for out-
going calls.
0
20 External Information
CFW Mode
0 = Transfer Information
1 = Incoming Information
Determine which information is displayed
in the "STATION" area for a transferred
call when the extension has Call Forward
set with an Abbreviated Dial number as
the destination. Selecting "0" (Transfer In-
fo) will display the extension number which
called the extension with external Call For-
ward set. Selecting "1" (Incoming Info) will
display the extension number which has
the external Call Forward set.
This option only applies when Call For-
ward is set using a service code (Pro-
grams 11-11-01 ~ 11-11-07) and the desti-
nation uses an Abbreviated Dial bin. It
does not include Off-Premise or Centrex
transfers.
0
21 S-Point Terminal
Number
0 = MSN Number
1 = Extension Number
0
22 Security Auto Dialing 0 = No Output
1 = Output
Emergency call from Watch Mode. Define
SMDR output on/off. Output is SAD (Se-
curity auto dialing).
1
23 Watch Auto Dialing 0 = No Output
1 = Output
Emergency call from Remote Inspection.
Define SMDR output on/off. Output is
WAD (Watch auto dialing )
1
25 Call Waiting (V4.0
Added)
0 = No Output
1 = Output
Define Call Waiting output on/off 1
Conditions
None
SL1100
ISSUE 6.0
2-352 Program 35 : SMDR Account Code Setup
Program
35