LAN Configuration
121
NETGEAR ProSAFE VPN Firewall FVS318G v2
2. Select Network Configuration > QoS.
3. To enable QoS, under Do you want to enable QoS, select the Ye
s radio button.
4. To select the QoS type, next to QoS
Type, select either the Rate Control or the Priority
radio button.
If Rate Control is selected as the
the QoS type, then only rate control QoS profiles are
active.
If Priority is selecte
d as
the QoS type, then only priority QoS profiles are active.
5. Under the List of QoS Profiles table, select the QoS profiles that
you want to enable or
disable and click either the Enable button or the Disable button.
6. Click the Ap
ply button.
Your changes are saved.
To add a QoS profile:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Network Con
figuration > QoS.
The QoS screen displays.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
