NETGEAR FVS318G - Page 164

Firewall Protection
164
NETGEAR ProSAFE VPN Firewall FVS318G v2
- Access to the web server is the (simulated) public IP address. 10.1.0.52
Tip: If you arrange with
your ISP to use more than one public IP address,
you can use the additional public IP addresses to map to servers on
your LAN or DMZ. One of these public IP addresses is used as the
primary IP address of the router that provides Internet access to your
LAN computers through NAT. The other addresses are available to
map to your servers.
 To configure the VPN firewall for additional IP addresses:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen displays.
b. In the User
name field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your persona
lized
password. Leave the domain as it is (geardomain).
c. Click the L
ogin button.
The Router Status screen displays. After five minutes of inactivity,
which is the default
login time-out, you are automatically logged out.
2. Select S
e
curity > Firewall.
The Firewall submenu tabs display.
3. Choose one
of the following:
• If your ser
ver is to be on your LAN, click the LAN WAN Rules submenu tab.
• If your ser
ver is to be on your DMZ, click the DMZ WAN Rules submenu tab.
The IPv4 radio butto
n is selected by default. The screen displays the IPv4 settings.