Firewall Protection
165
NETGEAR ProSAFE VPN Firewall FVS318G v2
4. Under the Inbound Services table, click the Add table button.
5. From the Se
rvice list, select HTTP for a web server.
6. From the Action
list, select ALLOW always.
7. In the Sen
d to LAN Server field, enter the local IP address of your web server computer.
The IP address is 192.168.1.2 in this example.
8. In the W
AN Destination IP Address fields, enter 10.1.0.52.
9. Click the Ap
ply button.
Your changes are saved.
To test the connection from a computer on the Internet, type http://<IP_addre
ss>, in which
<IP_address> is the public IP address that you mapped to your web server in Step 8. You
see the home page of your web server.
IPv4 LAN WAN or IPv4 DMZ WAN Inbound Rule: Specifying an Exposed Host
Specifying an exposed host allows you to set up a computer or server that is available to
anyone on the Internet for services that you did not yet define.
To Next Page
Loading...
