NETGEAR FVS318G - Page 177

Firewall Protection
177
NETGEAR ProSAFE VPN Firewall FVS318G v2
to the list for use in defining firewall rules. The Services screen shows a list of services that
you defined.
To define a new service, you must determine first which port number
or range
of numbers is
used by the application. You can usually determine this information by contacting the
publisher of the application, user groups, or newsgroups. When you know the port number
information, you can enter it on the Services screen.
The following ports are used internally:
• TCP ports. 1
1, 23, 53, 113, 443, 7911, 49152
• UDP ports.
53, 67, 161, 500, 520, 1028, 1029, 1030, 1900, 4500
 To add a customized service:
1. Log in to the unit:
a. In the address field of any of the qualified web browsers, enter
https://192.168.1.1.
The NETGEAR Configuration Manager Login screen d
isplays.
b. In the Username
field, enter admin and in the Password / Passcode field, enter
password.
Use lowercase letters. If you changed the password, enter your personalized
password. Leave the domain as it is (geardomain).
c. Click
the Logi
n button.
The Router Status screen displays. After five minutes of inactivity
, which is the default
login time-out, you are automatically logged out.
2. Select Security
>
Services.