Virtual Private Networking Using IPSec and L2TP Connections
272
NETGEAR ProSAFE VPN Firewall FVS318G v2
Create the Mode Config IPSec Configuration (Phase 2 Settings)
On the VPN firewall, the IPSec configuration (phase 2 settings) is referred to as the IKE
settings.
To create an IPSec configuration:
1. Right-click th
e VPN client icon in your Windows system tray, and select Configuration
Panel.
The Configuration Panel screen displays.
2. In the tree list pane of the Configuration Panel screen, right-click
the GW_ModeConfig
authentication phase name, and select New Phase 2.
3. Change th
e name of the IPSec configuration (the default is Tunnel):
a. Right-click the IPSec con
figuration name.
b. Select Rename.
c. Type T
unnel_ModeConfig.
d. Click anywhere in the tree list pane.
This is the n
ame for the IPSec configuration that is used only for the VPN client, no
t
during IPSec negotiation. You can view and change this name in the tree list pane. This
name must be a unique name.
To Next Page
Loading...
