Virtual Private Networking Using IPSec and L2TP Connections
271
NETGEAR ProSAFE VPN Firewall FVS318G v2
7. Click the Advanced tab in the Authentication pane.
8. Specify the settings that are described in the following table.
9. To use the new settings immediately, click the App
ly button.
10. To keep the settings for future use, click the Sav
e button.
Table 59. VPN client advanced authentication settings (Mode Config)
Setting Description
Advanced features
Mode Config Select this check box to enable Mode
Config.
Aggressive Mode Select this check box to enable aggressive mode as the mode of negotiation with
the VPN firewall.
NAT-T Select Automatic from the list to enable the VPN client and VPN firewall to
negotiate NAT-T.
Local and Remote ID
Local ID As the type of ID, select DNS
f
rom the Local ID list because you specified FQDN
in the VPN firewall configuration.
As the value of the ID, enter client.com as the local ID for the VPN client.
Note: The remote ID on the VPN firewall is the local ID on the VPN client.
Remote ID As the type of ID, select DNS from the Remote ID list because you specified an
FQDN in the VPN firewall configuration.
As the value of the ID, enter router.com as the remote ID for the VPN firewall.
Note: The local ID on the VPN firewall is the remote ID on the VPN client.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
