NETGEAR FVS318G - Page 363

Monitor System Access and Performance
363
NETGEAR ProSAFE VPN Firewall FVS318G v2
The following table explains the fields of the Router Status screen:
Table 80. Router Status screen information
Item Description
System Info
System Name The NETGEAR system name.
Firmware Version The installed firmware version.
LAN (VLAN) Information
For each of the LAN ports
, the screen shows the IP address and subnet mask. For more detailed
information, see Table 82 on page 367.
LAN IPv4/IPv6 Information
MAC Address The MAC address of the
VPN firewal
l.
IPv6 Address The IPv6 address that is assigned to the VPN firewall. For information
about configuring the IPv6 address, see Configure the IPv6 Internet
Connection and WAN Settings on page 38.
DHCP Server The status of the IPv4 DHCP server (Enabled or Disabled). For information
about configuring the IPv4 DHCP server, see Configure a VLAN Profile on
page 61.
DHCP Relay The status of the IPv4 DHCP relay (Enabled or Disabled). For information
about configuring the IPv4 DHCP relay, see Configure a VLAN Profile on
page 61.
DHCPv6 Server The status of the DHCPv6 server (Enabled or Disabled) for the LAN. For
information about configuring the DHCPv6 server for the LAN, see Manage
the IPv6 LAN on page 78.
DMZ IPv6 Information
IPv6 Address The IPv6 address that i
s assig
ned to the DMZ port. For information about
configuring the IPv6 address for the DMZ, see Enable and Configure the
DMZ Port for IPv4 and IPv6 Traffic on page 96.
DHCPv6 Server The status of the DHCPv6 server (Enabled or Disabled) for the DMZ. For
information about configuring the DHCPv6 server for the DMZ, see Enable
and Configure the DMZ Port for IPv4 and IPv6 Traffic on page 96.
WAN Information
WAN (IPv4) The IPv4 address, subnet mask, ga
t
eway, and status of the port (UP or
Down). For more detailed information, see Table 82 on page 367.
WAN (IPv6) The IPv6 address, gateway, and status of the port (UP or Down). For more
detailed information, see Table 82 on page 367.