NETGEAR FVS318G - Page 392

Troubleshooting
392
NETGEAR ProSAFE VPN Firewall FVS318G v2
• Make sure that the VPN firewall can provide IPv6 addresses to the computers on the
LAN.
For more information, see Manage the IPv6 LAN o
n p
age 78. Check the settings on the
LAN Setup (IPv6) screen, and if applicable
for your type of configuration, on the RADVD
screen.
Check the computer:
• Make sure that the o
perating system supports IPv6.
Normally, the following operating systems support IPv6:
- Windows 7, all 32-bit and 64-bit versions
- Windows Vista, all 32-bit and 64-bit versions
- Windows XP Professional SP3 (32-bit and 64-bit)
- Windows Server 2008, all versions
- Windows Server 2008 R2, all versions
- Windows Server 2003, all versions
- Windows Server 2003 R2, all versions
- Linux and other UNIX-based systems with a correctly configured kernel
- MAC OS X
• Make sure that IPv6 is e
nabled on the computer.
On a computer that runs a Windows-based operating system, do the following (no
te that
the steps might differ on the various Windows operating systems):
a. Op
en the Network Connections screen or the Network and Sharing Cen
ter screen.
For example, on the Windows taskbar, click Sta
rt, select Control Panel, and select
Network Connections.