Nokia 7210 SAS-Mxp - Page 108

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
File system management
x:x:x:x:x:x:d.d.d.d[-interface]
x — 0 to FFFF (hexadecimal)
d — 0 to 255 (decimal)
interface — a string up to 32, for link local addresses
cflash-id or usb-flash-id — cf1:, cf2:, uf1: (7210 SAS-T, 7210 SAS-Sx
1/10GE: standalone and standalone-VC,
7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2:, cf2-A:, cf2-B:, uf1:, uf1-A:, uf1-B:
(7210 SAS-R6 and 7210 SAS-R12)
cf1:, cf2: (7210 SAS-Sx 1/10GE: standalone
and standalone-VC)
force
Keyword to force an immediate copy of the specified file(s).
file copy force
Keyword to execute the command without displaying a user prompt message.
delete
Syntax
delete file-url [force]
Context
file
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command deletes the specified file.
The optional wild-card ‟*” can be used to delete multiple files that share a common (partial) prefix and/or
(partial) suffix. When the wild-card is entered, the following prompt displays for each file that matches the
wild-card:
‟Delete file <filename> (y/n)?”
Parameters
file-url
Specifies the URL or filename.
Values
file-url — local-url | remote-url
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
108
SPACER TEXT