Nokia 7210 SAS-Mxp - 1830 VWM LED Functionality

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Example
The following is a sample configuration output of a time range beginning at 11:00 and ending at 12:00. This
schedule runs all weekdays during this time period.
A:sim1>config>system>cron>time-range# show cron time-range detail
===============================================================================
Cron time-range details
===============================================================================
Name : 1
Triggers : 0
Status : Inactive
Periodic : weekdays Start 11:00 End 12:00
===============================================================================
A:sim1>config>system>cron>time-range#
6.14.1.3.7.5 Weekend
The weekend command configures the start and end of a periodic schedule for weekends (Saturday and
Sunday). The resolution must be at least one minute apart, for example, start at 11:00 and end at 11:01. A
start time and end time of 11:00 is invalid.
Use the following syntax to configure a time range that is repeated on weekends.
config>system>cron>time-range$
weekend start time-of-day end time-of-day
Example: Command usage to create a time range that is repeated on weekends
config>system>cron>time-range$ weekend start 11:00 end 12:00
config>system>cron>time-range$
Example
The following is a sample configuration output of a weekend time range beginning at 11:00am and ending
at 12:00pm, both Saturday and Sunday.
To specify 11:00am to 12:00pm on Saturday or Sunday only, use the absolute parameter for one day, or
the weekly parameter for every Saturday or Sunday accordingly. In addition, see the schedule parameter
to schedule oneshot or periodic events in the config>system>cron context.
A:sim1>config>system>cron>time-range# show cron time-range detail
===============================================================================
Cron time-range details
===============================================================================
Name : 1
Triggers : 0
Status : Inactive
Periodic : weekend Start 11:00 End 12:00
6.14.1.3.7.6 Weekly
The weekly command configures the start and end of a periodic schedule for the same day every week,
for example, every Friday. The start and end dates must be the same. The resolution must be at least one
minute apart, for example, start at 11:00 and end at 11:01. A start time and end time of 11:00 is invalid.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
309
SPACER TEXT