7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Parameters
router-instance
Specifies the router name or service ID.
Values router-name: Base, management
service-id: 1 to 2147483647
Default Base
service
Syntax
service
Context
monitor
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
Commands in this context configure criteria to monitor specific service SAP criteria.
id
Syntax
id service-id
Context
monitor>service
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command displays statistics for a specific service, specified by the service-id, at the configured
interval until the configured count is reached.
The first screen displays the current statistics related to the service-id. The subsequent statistical
information listed for each interval is displayed as a delta to the previous display.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
89
SPACER TEXT
To Next Page
Loading...