7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
console-speed
Syntax
console-speed baud-rate
no console-speed
Context
bof
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command configures the console port baud rate.
When this command is issued to edit the BOF used for the most recent boot, the BOF and the active
configuration are changed immediately.
The no form of this command reverts to the default value.
Default
115200
Parameters
baud-rate
The console port baud rate, expressed as a decimal integer.
Values 9600, 19200, 38400, 57600, 115200
4.13.2.1.4 Image and configuration management
persist
Syntax
persist {on | off}
Context
bof
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
185
SPACER TEXT
To Next Page
Loading...