7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
no event rmon-event-id
Context
config>system>thresholds>rmon
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command configures an entry in the RMON-MIB event table. The event command controls the
generation and notification of threshold crossing events configured with the alarm command. When a
threshold crossing event is triggered, the rmon>event configuration optionally specifies if an entry in the
RMON-MIB log table should be created to record the occurrence of the event. It may also specify that an
SNMP notification (trap) should be generated for the event. The RMON-MIB defines two notifications for
threshold crossing events: Rising Alarm and Falling Alarm.
Creating an event entry in the RMON-MIB log table does not create a corresponding entry in the TiMOS
event logs. However, when the event-type is set to trap, the generation of a Rising Alarm or Falling
Alarm notification creates an entry in the TiMOS event logs and that is distributed to whatever TiMOS log
destinations are configured: CONSOLE, session, memory, file, syslog, or SNMP trap destination.
The TiMOS logger message includes a rising or falling threshold crossing event indicator, the sample type
(absolute or delta), the sampled value, the threshold value, the rmon-alarm-id, the associated rmon-event-
id and the sampled SNMP object identifier.
This no form of this command removes an rmon-event-id from the configuration.
Parameters
rmon-event-type
Specifies the type of notification action to be taken when this event occurs.
Values log — An entry is made in the RMON-MIB log table for each event
occurrence. This does not create a TiMOS logger entry. The RMON-
MIB log table entries can be viewed using the show system
thresholds command.
trap — A TiMOS logger event is generated. The TiMOS logger utility
then distributes the notification of this event to its configured log
destinations which may be CONSOLE, telnet session, memory log,
cflash file, syslog, or SNMP trap destinations logs.
both — Both an entry in the RMON-MIB logTable and a TiMOS logger
event are generated.
none — No action is taken.
Default both
description description-string
Specifies a user configurable string that can be used to identify the purpose of this event.
This is an optional parameter and can be up to 80 characters. If the string contains special
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
389
SPACER TEXT
To Next Page
Loading...