Nokia 7210 SAS-Mxp - System Command Reference; Command Hierarchies

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Parameters
card-id
Specifies the card on the 1830 VWM clip-on device attached to 7210 SAS. Card ID 1
identifies the module in slot #1 of the 1830 CWDM device and Card ID 2 identifies the
module in slot #2 of the 1830 CWDM device.
Values 1, 2
shutdown
Syntax
[no] shutdown
Context
config>system>vwm-shelf
Platforms
7210 SAS-T (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
Description
This command administratively disables the management of the clip-on device identified by the parameter
vwm-shelf-id. When this command is executed, the software will clear all pending events/traps/alarms
related to this shelf.
The no form of this command administratively enables the management of the clip-on device. The software
raises appropriate events/traps/alarms for the device.
Default
no shutdown
card-type
Syntax
[no] card-type card-type
Context
config>system>vwm-shelf>card
Platforms
7210 SAS-T (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
367
SPACER TEXT