Nokia 7210 SAS-Mxp - CRON Commands

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
use ASCII alphabets or numbers. Valid card-type acronyms are listed in
the Table 42: Card type acronyms for 1830 DWDM devices.
shutdown
Syntax
[no] shutdown
Context
config>system>vwm-shelf>card
Platforms
7210 SAS-T (network and access-uplink), 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12
Description
This command allows the user to administratively disable the management of a specific module inserted
in a slot on the clip-on device. When this command is executed, the 7210 SAS software clears all pending
events/traps/alarms/LED related to this card.
The no form of this command allows the user to administratively enable the management of the card on
the clip-on device. The software raises appropriate events/traps/alarms for the card.
Default
no shutdown
6.20.2.1.3 Virtual Chassis (VC) configuration commands
vc-stack
Syntax
vc-stack
Context
config>system
Platforms
7210 SAS-Sx 1/10GE: standalone-VC and 7210 SAS-S 1/10GE: standalone-VC
Description
Commands in this context configure VC parameters.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
372
SPACER TEXT