7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
File system management
3 File system management
This chapter describes the file system management.
3.1 The file system
The 7210 SAS file system is used to store files used and generated by the system, for example, image
files, configuration files, logging files, and accounting files.
The file commands allow you to copy, create, move, and delete files and directories, navigate to a different
directory, display file or directory contents and the image version.
3.1.1 Compact flash devices
The file system is based on a DOS file system. The 7210 SAS devices provide several storage options,
including internal flash and USB.
The following compact flash devices are supported:
•
internal non-removable flash, cf1:\
•
external removable compact flash or external removable SD card, cf2:\
•
external USB slot, uf1:\
The device names are relative device names in that they refer to the devices local to the control processor
running the current console session. As in the DOS file system, the colon (‟:”) at the end of the name
indicates it is a device.
The following table lists the storage locations available on specific 7210 SAS platforms.
Table 16: Storage locations on 7210 SAS platforms
Storage locations7210 SAS platforms
cf1:\ cf2:\ uf1:\
7210 SAS-Mxp
✓
✓
9
✓
7210 SAS-R6
✓
✓
9
✓
7210 SAS-R12
✓
✓
9
✓
7210 SAS-S 1/10GE
✓
✓
10
9
external removable compact flash
10
external removable SD card
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
94
SPACER TEXT
To Next Page
Loading...