Nokia 7210 SAS-Mxp - Storage Locations for Accounting, Logs, Index File, and Images

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Keyword to display the absolute rate-per-second value for each statistic.
rate
Keyword to display the rate per second for each statistic instead of the delta.
sdp
Syntax
sdp {sdp-id | far-end ip-address} [interval seconds] [repeat repeat] [absolute | rate]
Context
monitor>service>id service-id
Platforms
Supported on all 7210 SAS platforms as described in this document, including those operating in access-
uplink mode
Description
This command monitors statistics for a SDP binding associated with this service.
Parameters
sdp-id
Specifies the SDP identifier.
Values 1 to 17407
absolute
Keyword to display the absolute rate per second value for each statistic.
far-end ip-address
Specifies the system address of the far-end 7210 SAS for the SDP in dotted-decimal
notation.
interval seconds
Specifies the interval for each display, in seconds.
Default 11 seconds
Values 11 to 60
rate
Keyword to display the rate per second for each statistic instead of the delta.
repeat repeat
Specifies how many times the command is repeated.
Default 10
Values 1 to 999
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
92
SPACER TEXT