Nokia 7210 SAS-Mxp - PTP Capabilities

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Use the following CLI syntax to configure the location.
config>system
location <location>
Example
The following example shows the command usage to configure the location of the device.
config>system# location ‟Bldg.1-floor 2-Room 201”
6.14.1.1.4 CLLI code
The Common Language Location code (CLLI code) is an 11-character standardized geographic identifier
that is used to uniquely identify the geographic location of a router.
Use the following CLI command syntax to define the CLLI code.
— config>system
— clli-code <clli-code>
The following example shows the command usage to define the CLLI code.
Example:
— config>system# clli-code abcdefg1234
6.14.1.2 Coordinates
Use the optional coordinates command to specify the GPS location of the device. If the string contains
special characters (#, $, spaces, and so on), the entire string must be enclosed within double quotes.
Use the following CLI syntax to configure the location.
config>system
coordinates coordinates
Example: Command usage to configure the location
config>system# coordinates "N 45 58 23, W 34 56 12"
Example: Configuration output of general system commands
sysName@domain>config>system# info
#------------------------------------------
echo "System Configuration "
#------------------------------------------
name "ALA-12"
contact "Fred Information Technology"
location "Bldg.1-floor 2-Room 201"
clli-code "abcdefg1234"
coordinates "N 45 58 23, W 34 56 12"
. . .
exit
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
295
SPACER TEXT