7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Boot options
Example: Saving a BOF configuration
A:ALA-1# bof
A:ALA-1>bof# save cf1:
A:ALA-1>bof#
or
admin# save [file-url][detail][index]
Example: Saving to a different filename
A:ALA-1>admin# save cf1:\testABC.cfg
Saving config.# Saved to cf1:\testABC.cfg
... complete
A:ALA-1#
4.12.1.5 Rebooting
When an admin>reboot command is issued, the system reboots. Changes are lost unless the
configuration is saved. Use theadmin>save file-urlcommand to save the current configuration. If no
command line options are specified with the reboot command, the user is prompted to confirm the reboot
operation. However, if the now option is specified, the user is not prompted to confirm the reboot operation.
The reboot upgrade command forces an upgrade of the device firmware (CPLD and ROM) and reboots
the system.
Note:
The auto-init option is supported on the 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE (standalone),
7210 SAS-Sx 10/100GE (standalone), and 7210 SAS-T. It is not supported on 7210 SAS-R6,
7210 SAS-R12, and platforms operating in standalone-VC mode.
Use the following CLI syntax to reboot.
admin# reboot [upgrade] [auto-init] [now]
Example: Rebooting the system
A:DutA>admin# reboot
Are you sure you want to reboot (y/n)? y
Resetting...OK
Nokia 7210 Boot ROM. Copyright 2016 Nokia.
All rights reserved. All use is subject to applicable license agreements.
Running POST tests from ROM
Testing ROM load area...done
Relocating code...Jumping to RAM
...
When an admin reboot auto-init command is issued, the system resets the existing BOF and reboots.
The system startup process after the admin reboot auto-init command is executed is the same as the first
time system boot as described in System initialization.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
176
SPACER TEXT
To Next Page
Loading...