Nokia 7210 SAS-Mxp - Clear Commands; Debug Commands; Command Descriptions; Configuration Commands

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Note:
When the G.8275.1 profile is configured, the 7210 SAS supports a count value of 3 only.
The no form of this command reverts the count to the default value.
Default
anno-rx-timeout 3
Parameters
count
Specifies the PTP announce receipt timeout count.
Values 2 to 10
clock
Syntax
clock
Context
config>system>ptp
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
Description
Commands in this context configure the source of frequency reference for PTP.
freq-source
Syntax
freq-source freq-source
no freq-source
Context
config>system>ptp>clock
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx 1/10GE (standalone), 7210 SAS-Sx
10/100GE 64SFP+ 4QSFP28 (standalone), 7210 SAS-T (network and access-uplink)
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
391
SPACER TEXT