Nokia 7210 SAS-Mxp - Set-Time; Display-Config

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
6.20.1.31 Clear commands
clear
- screen action-name [owner owner-name]
- system
- ptp inactive-peers
- ptp peer ip-address statistics
- ptp statistics
- port port-id statistics
- script-control
- script-policy
- completed [script-policy-name] [owner owner-name]
- sync-if-timing {ref1 | ref2}
- sync-if-timing {ref1 | ref2 | bits1 | bits2}
6.20.1.32 Debug commands
debug
- sync-if-timing
- force-reference {ref1 | ref2 | ptp}
- force-reference {ref1 | ref2 | bits1 | bits2 | ptp}
- no force-reference
- [no] system
- ntp [router router-name] [interface ip-int-name]
6.20.2 Command descriptions
• Configuration commands
• Show commands
• Clear commands
• Debug commands
6.20.2.1 Configuration commands
• Generic commands
• System information commands
• System alarm commands
• PTP commands
• Date and time commands
• System synchronization commands
• Generic commands
• System administration commands
• System alarm contact commands
• Redundancy commands
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
348
SPACER TEXT