Nokia 7210 SAS-Mxp - Page 569

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Values 1 to 7
mpls-p2mp
Syntax
mpls-p2mp max_slices
no mpls-p2mp
Context
config>system>glob-res-profile>sf-ingress-internal-tcam
Platforms
7210 SAS-R6 and 7210 SAS-R12
Description
This command allows the user to configure the resources to be used for NG-MVPN P2MP LSPs. The
users must allocate some resources using the command before configuring NG-MVPN. It might be
necessary to free up resources allocated to other features to allocate resources for it.
On 7210 SAS-R6, the number of resources per slice/chunk varies. Hence, the number of resources
allocated to a feature varies based on the order of allocation of resources among different features. It might
be necessary to allocate more slices to a feature to achieve desired scaling.
The no form of this command does not allocate any resources for use by P2MP LSPs used with NG-MVPN
feature. If no resources are allocated for use, the software will not be able to setup P2MP LSPs for use
with NG-MVPN.
Parameters
max_slice
Specifies the number of slices to be allocated for NG-MVPN P2MP LSPs.
Values 0 to 3
Default 1
6.20.2.2 Show commands
6.20.2.2.1 System commands
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
569
SPACER TEXT