Nokia 7210 SAS-Mxp - CLI Environment Commands; CLI Monitor Commands

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
CLI usage
Method 2:
A:ALU-7210# configure
A:ALU-7210>config# service
A:ALU-7210>config>service# epipe 6
A:ALU-7210>config>service>epipe# sap 1/1/2
A:ALU-7210>config>service>epipe>sap# ingress
A:ALU-7210>config>service>epipe>sap>ingress#
The CLI returns an error message when the syntax is incorrect.
A:ALU-7210>config>service>epipe# sapp
^
Error: Bad command.
A:ALU-7210>config>service>epipe#
2.2.2 Basic CLI commands
The console control commands are the commands that are used for navigating within the CLI and
displaying information about the console session. Most of these commands are implemented as global
commands. They can be entered at any level in the CLI hierarchy with the exception of the password
command, which must be entered at the ROOT level. The console control commands are described in the
following table.
Table 5: Console control commands
Command Description
<Ctrl-c> Aborts the pending command.
<Ctrl-z> Terminates the pending command line and returns to the ROOT
context.
back Navigates the user to the parent context.
clear Clears statistics for a specified entity or clears and resets the entity.
echo Echos the text that is typed in. Primary use is to display messages to
the screen within an exec file.
exec Executes the contents of a text file as if they were CLI commands
entered at the console.
exit Returns the user to the previous higher context.
exit all Returns the user to the ROOT context.
help
?
Displays help in the CLI.
history Displays a list of the most recently entered commands.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
29
SPACER TEXT