Nokia 7210 SAS-Mxp - Synchronization; Configuration and Boot-Env Synchronization; State Database Synchronization

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
SSM value received on port
SDH interface
SyncE interface in
SDH mode
SONET interface
SyncE interface in
SONET mode
E1 interface T1 interface (ESF) Internal relative
quality level
8. Lowest quality
qualified in QL-
enabled mode
1100 (smc) 00100010 11111111
(smc)
9.
00101000 11111111
(st4)
10.
1011 (sec/eec1)
1110 (pno)
1011 (sec)
01000000 11111111
(pno)
11.
1111 (dnu) 1111 (dus) 1111 (dnu) 00110000 11111111
(dus)
12.
13. QL_INVALID
14. QL_FAILED
Any other Any other Any other N/A
15. QL_UNC
The following table lists the synchronization message coding and source priorities for SSM values
transmitted by interface type.
Table 32: Synchronization message coding and source priorities
SSM values to be transmitted by interface of type
Internal relative
quality level
SDH interface
SyncE interface in
SDH mode
SONET interface
SyncE interface in
SONET mode
E1 interface T1 interface (ESF)
1. Best quality 0010 (prc) 0001 (PRS) 0010 (prc) 00000100 11111111
(PRS)
2. 0100 (ssua) 0000 (stu) 0100 (ssua) 00001000 11111111
(stu)
3. 0100 (ssua) 0111 (st2) 0100 (ssua) 00001100 11111111
(st2)
4. 0100 (ssua) 0100 (tnc) 0100 (ssua) 01111000 11111111
(tnc)
5. 1000 (ssub) 1101 (st3e) 1000 (ssub) 01111100 11111111
(st3e)
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
264
SPACER TEXT