EasyManua.ls Logo

Nokia 7210 SAS-Mxp - 7210 SAS-R6 and 7210 SAS-R12 Configuration Guidelines for System Resource Profile

Nokia 7210 SAS-Mxp
736 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Note:
After the BOF is reset, the system may not boot up with the last saved system configuration
unless the new BOF also uses the same configuration file. If you require the system to boot
up with the last saved system configuration, Nokia recommends that you should run the
admin>save file-url command to save the current system configuration and modify the BOF to
use this configuration.
Use the following syntax to reset the BOF and reboot.
admin# reboot auto-init [now]
Example: Output of the admin reboot auto-init command
Example: *A:ALA-1# admin reboot auto-init
WARNING: Configuration and/or Boot options may have changed since the last save.
Are you sure you want to reset the bof and reboot (y/n)? Y
Resetting...OK
Nokia 7210 Boot ROM. Copyright 2016 Nokia.
All rights reserved. All use is subject to applicable license agreements.
6.15.7 Post-boot configuration extension files
Two post-boot configuration extension files are supported and are triggered when either a successful
or failed boot configuration file is processed. The commands specify URLs for the CLI scripts that are
run following the completion of the boot-up configuration. A URL must be specified or no action is taken.
The commands are persistent between router reboots and are included in the configuration saves
(admin>save).
Use the following syntax to configure a URL for a CLI script that runs when the boot-up configuration is
completed.
config>system
boot-bad-exec file-url
boot-good-exec file-url
Example: Command usage
The following example shows the command usage to configure a URL for a CLI script that runs when the
boot-up configuration is completed.
config>system# boot-bad-exec ftp://test:test@192.168.xx.xxx/./fail.cfg
config>system# boot-good-exec ftp://test:test@192.168.xx.xxx/./ok.cfg
Example: Command output
*A:ALA# configure system
*A:ALA>config>system# info
----------------------------------------------
#--------------------------------------------------
echo "System Configuration"
#--------------------------------------------------
name "ALA"
boot-good-exec "cf1:\good.cfg"
boot-bad-exec "cf1:\bad.cfg"
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
317
SPACER TEXT

Table of Contents

Related product manuals