7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
6.15.5 Save
The save command saves the running configuration to a configuration file. If the debug-save parameter is
specified, debug configurations are saved in the configuration file; otherwise, the debug configurations are
not saved between reboots.
Use the following syntax to save the running configuration.
admin
save [file-url][detail][index]
debug-save [file-url]
Example: Command usage to save the running configuration
admin# save ftp://test:test@192.168.x.xx/./1.cfg
admin# debug-save debugsave.txt
Example: Configuration output of the save command
A:ALA-1>admin# save ftp://test:test@192.168.x.xx/./1x.cfg
Writing file to ftp://test:test@192.168.x.xx/./1x.cfg
Saving configuration ...Completed.
ALA-1>admin# debug-save ftp://test:test@192.168.x.xx/./debugsave.txt
Writing file to ftp://julie:julie@192.168.x.xx/./debugsave.txt
Saving debug configuration .....Completed.
A:ALA-1>admin#
6.15.6 Reboot
The reboot command reboots the router including redundant cards in redundant systems. If the now
option is not specified, you are prompted to confirm the reboot operation. The reboot upgrade command
forces an upgrade of the device firmware (CPLD and ROM) and reboots.
Use the following syntax to reboot the router.
admin
reboot [upgrade][auto-init][now]
Example: Command usage to reboot the router
admin# reboot now
Example: Output of the reboot command
A:ALA-1>admin# reboot now
Are you sure you want to reboot (y/n)? y
Rebooting...
Using preloaded VxWorks boot loader.
...
When an admin reboot auto-init command is issued, the system resets the existing BOF and reboots. The
system startup process after the admin reboot auto-init command is executed is the same as the first
time system boot described in System initialization.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
316
SPACER TEXT
To Next Page
Loading...