7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Getting started
Mode of operation and configuration method7210 SAS platform
Network Access-uplink Standalone Standalone-VC Satellite
7210 SAS-K 2F6C4T
1
Port Mode
Configuration
2
Port Mode
Configuration
2
Implicit
7210 SAS-K 3SFP+ 8C
1
Port Mode
Configuration
2
Port Mode
Configuration
2
Implicit
7210 SAS-Mxp
Implicit
3
Explicit BOF
Configuration
Explicit BOF
Configuration
7210 SAS-R6 Implicit Implicit
7210 SAS-R12
4
Implicit Implicit
7210 SAS-Sx/S 1/10GE
4
Implicit
3
Explicit BOF
Configuration
Explicit BOF
Configuration
Explicit BOF
Configuration
7210 SAS-Sx 10/100GE
Implicit
3
Explicit BOF
Configuration
Explicit BOF
Configuration
7210 SAS-T Explicit BOF
Configuration
Explicit BOF
Configuration
Implicit
1.3 7210 SAS port modes
Unless explicitly noted, the phrase ‟port mode” refers to the current port configuration of the 7210 SAS
node. The 7210 SAS platform supports the configuration of the following port modes.
• access port mode
Access ports are configured for customer-facing traffic if Service Access Points (SAPs) are required.
The appropriate encapsulation type must be configured to distinguish the services on the port; services
are configured on the port based on the encapsulation value.
Access ports can be configured on all the 7210 SAS platforms.
• access-uplink port mode
Access-uplink ports provide native Ethernet connectivity in service provider transport or in an
infrastructure network. With this option, the encap-type can be configured to only QinQ. Access-uplink
1
By default, the 7210 SAS-K 2F6C4T and 7210 SAS-K 3SFP+ 8C boot up in the network mode of
operation. These platforms also allow the use of access-uplink port mode (without explicit BOF
configuration), which provides the option to use Layer 2 uplinks instead of IP/MPLS uplinks to the network
core, similar to the 7210 SAS-K 2F1C2T router.
2
See section7210 SAS port modes for information about port mode configuration
3
Implicitly operates in network mode when standalone mode of operation is configured
4
Supports MPLS uplinks only and implicitly operates in network mode
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
23
SPACER TEXT
To Next Page
Loading...