Nokia 7210 SAS-Mxp - Tech-Support

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
• Rollback commands
• Peer commands
• MC-LAG commands
• LLDP system commands
• LLDP Ethernet port commands
• System resource-profile commands
• Global system resource profile commands
6.20.2.1.1 Generic commands
shutdown
Syntax
[no] shutdown
Context
config>system>ptp
config>system>time>ntp
config>system>time>sntp
config>system>cron>sched
config>system>script-control>script-policy
config>system>script-control>script
config>system>sync-if-timing>ref1
config>system>sync-if-timing>ref2
config>redundancy>multi-chassis>peer
config>redundancy>multi-chassis>peer>mc-lag
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
Note:
The config>redundancy>multi-chassis>peer and config>redundancy>multi-
chassis>peer>mc-lag contexts are not supported on 7210 SAS platforms configured in the
access-uplink operating mode
This command administratively disables the entity. When disabled, an entity does not change, reset, or
remove any configuration settings or statistics.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
349
SPACER TEXT