7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/100GE, SAP ingress policy ID 1 is the default when sap-
scale-mode is set to either low or high.
To switch between the low and high modes, the user must remove all SAP configurations, change the
mode, reboot the node, and reconfigure the SAPs and services.
The mandatory QoS configurations required to achieve higher SAP and service scaling are as follows.
• Access port-based egress queuing and shaping must be configured on all ports, including service
delivery ports and uplinks.
• On the 7210 SAS-Mxp, either access port-based ingress classification or SAP ingress table-based
classification and table-based policing (service meters) can be configured on uplinks for higher SAP
scaling.
• On the 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/100GE, access
port-based ingress classification and policing must be configured for higher SAP scaling.
• On the 7210 SAS-Mxp, Epipe and VPLS SAPs must use SAP ingress table-based classification and
table-based policing on service delivery ports for higher SAP scaling. The 7210 SAS-R6, 7210 SAS-
R12, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx 10/100GE do not support table-based policing (service
meters) for SAP ingress policing.
• On the 7210 SAS-Mxp, 7210 SAS-R6, and 7210 SAS-R12, IES and VPRN SAPs can use table-based
classification.
• R-VPLS SAPs must use CAM-based classification and policing.
Note:
See the 7210 SAS-Mxp, S, Sx, T Services Guide and 7210 SAS-R6, R12 Services Guide for
more information about high SAP scale mode and low SAP scale mode.
The no form of this command disables the use of high SAP and service scaling for Epipe and VPLS
services.
Default
no sap-scale-mode
Parameters
mode
Specifies the SAP scale mode.
Values high, low
high
Keyword to enable higher SAP and service scaling.
low
Keyword to disable higher SAP and service scaling.
6.20.2.1.26 Global system resource profile commands
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
563
SPACER TEXT
To Next Page
Loading...