Nokia 7210 SAS-Mxp - Page 562

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Table 63: Number of resources available for maximum IPv6 routes
Platforms Min value Max value Default
values
7210 SAS-T Access-Uplink mode (per
node)
1 6000 0
7210 SAS-T Network Mode (per node) 1 6000 0
7210 SAS-R12 (per IMM) 1 6900 0
7210 SAS-R6 and 7210 SAS-R12 IMM-
c (per IMM)
1 14300 0
7210 SAS-Mxp (per node) 1 14300 0
7210 SAS-Sx 1/10GE (standalone and
standalone-VC)
1 6100 0
7210 SAS-S 1/10GE (standalone and
standalone-VC)
1 6100 0
7210 SAS-Sx 10/100GE 1 6100 0
sap-scale-mode
Syntax
sap-scale-mode mode
no sap-scale-mode
Context
config>system>resource-profile (on the 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE, and 7210 SAS-Sx
10/100GE)
config>system>global-res-profile (on the 7210 SAS-R6 and 7210 SAS-R12)
Platforms
7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-Sx/S 1/10GE (standalone), and 7210 SAS-Sx
10/100GE (standalone)
Description
This command enables or disables a higher number of SAPs and services for Epipe and VPLS services.
There is no change in scaling for IES, VPRN, and RVPLS SAPs and services.
The low keyword is configured by default. The default SAP ingress policy ID 1 is used in this mode. On
the 7210 SAS-Mxp, if the high keyword is configured, the default SAP ingress policy ID 65536 is used to
differentiate the policy from the default SAP ingress policy ID 1. On the 7210 SAS-R6, 7210 SAS-R12,
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
562
SPACER TEXT