7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
information
Syntax
information
Context
show>system
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms configured in the
access-uplink operating mode
Description
This command displays general system information including the operating mode, basic system, SNMP
server, last boot and DNS client information.
Output
The following outputs are examples of system information, and Table 68: Output fields: system information
describes the output fields.
• Sample output
• Sample output for 7210 SAS-Sx/S 1/10GE (standalone)
• Sample output for 7210 SAS-Sx/S 1/10GE (standalone-VC)
Sample output
===============================================================================
System Information
===============================================================================
System Name : PE4-M2
System Type :
System Version : B-9.0.F-private
System Contact :
System Location :
System Coordinates :
System Up Time : 10 days, 06:50:01.84 (hr:min:sec)
SNMP Port : 161
SNMP Engine ID : 0000197f0000c408416161a3
SNMP Engine Boots : 571
SNMP Max Message Size : 1500
SNMP Admin State : Disabled
SNMP Oper State : Disabled
SNMP Index Boot Status : Not Persistent
SNMP Sync State : N/A
Tel/Tel6/SSH/FTP Admin : Disabled/Disabled/Enabled/Disabled
Tel/Tel6/SSH/FTP Oper : Down/Down/Up/Down
BOF Source : cf1:
Image Source : primary
Config Source : primary
Last Booted Config File : cf1:\mvpn_head.cfg
Last Boot Cfg Version : MON SEP 26 04:48:37 2016 UTC
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
580
SPACER TEXT
To Next Page
Loading...