Nokia 7210 SAS-Mxp - Page 579

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Output
The following output is an example of global system resource profile information, and Table 67: Output
fields: global system resource profile describes the output fields.
Sample output
*7210SASR>show>system# global-res-profile
============================================================================
System Global Resource Profile
============================================================================
----------------------------------------------------------------------------
G8032 Fast Flood : 5
Eth-Cfm Vpls Upmeps : 0
Mpls P2MP : 1
Max-ipv6-routes : disable
System-max-ecmp : 1
L3-max-ecmp-groups : 1945
Ldp-max-ecmp-groups : disable
Ldp-ecmp-percent-value : disable
Max-ip-subnets : 2000
port-scheduler-mode : disable
----------------------------------------------------------------------------
*7210R>show>system#
Table 67: Output fields: global system resource profile
Label Description
G8032 Fast Flood Displays the resources configured for use by G8032 fast-flood
feature
Mpls P2MP Displays the resources configured for NG-MVPN P2MP LSPs
Max-ipv6-routes The amount of L3 forwarding table entries configured for IPv6 /
64-bit address prefix lookups
System-max-ecmp The maximum number of ECMP paths allowed per IP destination
or LDP FEC
Max-ip-subnets The amount of L3 forwarding entries configured for use by IP
subnets of the directly connected interfaces (both IPv4 and IPv6
interfaces)
port-scheduler-mode The scheduler mode configured for use on egress
It can be either port-based (port-scheduler-mode is enabled) or
SAP-based (port-scheduler-mode is disabled).
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
579
SPACER TEXT