7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
Getting started
Table 4: Configuration process
Area Task Chapter
CLI Usage The CLI structure CLI usage
Basic CLI commands Basic CLI commands
Configure environment
commands
CLI environment commands
Configure monitor commands CLI monitor commands
Operational functions Directory and file
management
File system management
Virtual Chassis Configure virtual chassis Virtual chassis
Boot options Configure boot option files
(BOF)
Boot options
System configuration Configure system functions,
including hostname, address,
domain name, and time
parameters
System management
Reference List of IEEE, IETF, and other
proprietary entities
Standards and protocol support
1.5 Conventions
This section describes the general conventions used in this guide.
1.5.1 Precautionary and information messages
The following are information symbols used in the documentation.
DANGER: Danger warns that the described activity or situation may result in serious personal
injury or death. An electric shock hazard could exist. Before you begin work on this equipment,
be aware of hazards involving electrical circuitry, be familiar with networking environments, and
implement accident prevention procedures.
WARNING: Warning indicates that the described activity or situation may, or will, cause
equipment damage, serious performance problems, or loss of data.
Caution: Caution indicates that the described activity or situation may reduce your component or
system performance.
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
26
SPACER TEXT
To Next Page
Loading...