Nokia 7210 SAS-Mxp - PTP Ordinary Slave Clock for Frequency

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
----------------------------------------------
A:ALA-12>config>system#
6.14.1.3 System time elements
This section describes system time elements.
The system clock maintains time according to Coordinated Universal Time (UTC). Configure information
time zone and summer time (daylight savings time) parameters to correctly display time according to the
local time zone.
6.14.1.3.1 Zone
The zone command sets the time zone and/or time zone offset for the device. The 7210 SAS OS supports
system-defined and user-defined time zones.
Use the following CLI syntax to set the time zone.
config>system>time
zone std-zone-name|non-std-zone-name [hh [:mm]]
Example: Command usage to set the time zone
config>system>time#
config>system>time# zone GMT
Example: Zone output
A:ALA-12>config>system>time# info
----------------------------------------------
ntp
server 192.168.15.221
no shutdown
exit
sntp
shutdown
exit
zone UTC
----------------------------------------------
A:ALA-12>config>system>time#
The following table describes the system-defined time zones.
Table 40: System-defined time zones
Acronym Time zone name UTC offset
Europe
GMT Greenwich Mean Time UTC
WET Western Europe Time UTC
WEST Western Europe Summer Time UTC +1 hour
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
296
SPACER TEXT