Nokia 7210 SAS-Mxp - Basic System Configuration; Common Configuration Tasks

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
ref2
source-port 1/1/19
no shutdown
no ql-override
exit
bits1
interface-type e1 pcm31crc
ssm-bit 8
no ql-override
input
no shutdown
exit
output
no shutdown
exit
exit
bits2
input
no shutdown
exit
output
no shutdown
exit
exit
ptp
shutdown
no ql-override
exit
no revert
----------------------------------------------
*A:SAS-M2>config>system>sync-if-timing#
6.16.1.2 CLI syntax for 7210 SAS-R6 and 7210 SAS-R12
Example
The following is a sample CLI configuration for the 7210 SAS-R6 and 7210 SAS-R12.
*A:sasr_dutb>config>system>sync-if-timing# info detail
----------------------------------------------
no ql-selection
ref-order bits1 ref1 ref2 ptp
ref1
shutdown
no source-port
no ql-override
exit
ref2
shutdown
no source-port
no ql-override
exit
bits1
interface-type ds1 esf
no ql-override
input
shutdown
exit
output
shutdown
line-length 110
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
320
SPACER TEXT