Nokia 7210 SAS-Mxp - Table 44 Number of Resources Available for ACL-SAP-Egress

7210 SAS-MXP, R6, R12, S, SX, T BASIC SYSTEM
CONFIGURATION GUIDE RELEASE 22.9.R1
System management
Default
no mac-auth-res
Parameters
num-resources
Specifies the number of resources to allocate for MAC authentication. Configuring a
value of 0 is equivalent to configuring no mac-auth-res and effectively disables MAC
authentication.
Values 0 to 1
g8032-control-sap-tags
Syntax
[no] g8032-control-sap-tags vlan-range
Context
configure>system>resource-profile
Platforms
7210 SAS-Sx 1/10GE: standalone and standalone-VC, 7210 SAS-R6, 7210 SAS-R12
Description
This command configures the range of VLANs per IMM to be used internally with G8032 MEPs that
support hardware CCM message processing.
Note:
Users must ensure that the VLANs configured for use with G8032 MEPs are not configured for
any of the SAPs configured on the IMM.
Use one of the VLANs configured with this command to configure the VLAN for the G8032 MEP
configure>eth-ring>path>eth-cfm>mep>control-sap-tag.
Default
no g8032-control-sap-tags
Parameters
vlan-range
Specifies the range of VLANs per IM.
Values start-vlan — 3000 to 3512 (7210 SAS-R6 and 7210 SAS-R12)
512 to 768 (7210 SAS-Sx 1/10GE:standalone and standalone-VC)
end -vlan — 3000 to 3512 (7210 SAS-R6 and 7210 SAS-R12)
512 to 768 (7210 SAS-Sx 1/10GE:standalone and standalone-VC)
3HE 18197 AAAB TQZZA
© 2022 Nokia.
Use subject to Terms available at: www.nokia.com/terms/.
520
SPACER TEXT